Home / Aluminum Profiles / Door Profiles / Interior Profile / Sliding Series With Track

Sliding Door with Track: Synchronized Sliding Systems in Perfect and NICE

Interior door profiles · Sliding series with track

Linked sliding doors on a low drained track — Perfect System or NICE

Linked sliding panel doors for interiors: panels hang from a top track, run in a low, drained embedded bottom track and open together, so a slim glass wall becomes a wide opening between rooms. Choose NICE for patented hardware details or Perfect for a 5.0 mm solid-frame option.

NICE linked aluminum sliding door profile with bottom track in a living roomNICE · Linked sliding door with bottom track
Perfect slim-frame aluminum sliding door profile used as a glass partitionPerfect · Slim-frame sliding doors
∞Unlimited linked panels
13 / 16NICE frame series
5.0mmPerfect solid vertical frame
18 + 14Finishes (NICE + Perfect)

MT Aluminum (MT Flying / Mei Tong Flying) supplies sliding door with track profiles: the Perfect System and NICE synchronized sliding door profiles, with a top track and a low, drained bottom track. Panels are linked, so a telescopic sliding door set opens together and a slim partition wall becomes a wide opening between rooms. Prefer no floor rail? See our hanging sliding door profiles.

Linked, synchronized and telescopic

One sliding door idea, five names

Specifiers search for it as a synchronized sliding system, a linked door, a telescopic door or simply a sliding door with a track. In every case the panels are coupled by a linkage set (DX97A in NICE, SG268 in Perfect) so one pull moves all of them, each running on its own track lane.

Choose your system

NICE or Perfect?

Both systems use the same idea — slim aluminum frames running on a top track and a low, drained bottom track, with panels linked so they open together. They differ in frame series, track options and hardware.

NICE SystemPerfect System
Frame series4013 (13 mm) and 4016 (16 mm)Standard 4016 (1.5 mm frames) and Solid 4012 (5.0 mm solid vertical frame)
LinkageUnlimited linkage — no fixed number of tracks or panelsUnlimited linkage — no fixed number of tracks or panels
Bottom trackEmbedded bottom track with drain; stainless round-cap guide railEmbedded bottom track with drain; stainless round-cap guide rail
Linked openingDX97A three-linked sliding mechanismSG268 three-linked sliding set
Signature detailsPatented magnetic cover, NICE lock on the upper rail, direction-free linkage partsPerfect handle, matching side seals and seal covers, 8 mm glass sash
Best forProjects that want the slimmest look and hidden hardware detailsProjects that need extra-rigid 5.0 mm solid frames
NICE SYSTEM

NICE 4013 / 4016 sliding door with track

Multi-panel linked sliding doors with a 13 mm or 16 mm frame face and a drained embedded bottom track.

  • 4013 (13 mm) and 4016 (16 mm) frame series, rounded or right-angled frames
  • Unlimited linkage — no fixed number of tracks or panels
  • Bottom track embedded with drain for a near-flush floor
  • DX97A three-linked sliding mechanism — panels open together
  • Linkage parts without left/right distinction — no need to worry about direction
  • NICE regular top-and-bottom lock and NICE track magnetic strips
Configurations
4013 sliding4016 slidingUnlimited linked panelsEmbedded bottom track
aluminum sliding door profile – Direction-free linkage parts for NICE sliding door profilesDirection-free linkageLinkage parts work left or right
NICE magnetic cover on aluminum sliding door profileMagnetic coverEasy to install, never falls off
aluminum sliding door profile – Anti-vibration points on NICE sliding door sashAnti-vibration pointsLess vibration when the door closes
Key profiles
CodeProfileThickness
DX-98 / DX-10413 / 16 rounded door frame1.5 mm
DX-97C / DX-100B13 / 16 vertical door frame2.3 mm
SK819 / DX-10513 / 16 door frame with hook1.5 mm
DX-83ATop door frame2.0 mm
DX10Bottom door frame1.9 mm
SG309 / SG310Double / triple upper track1.0 / 1.6 mm
DX-55 / DX-56Double / triple bottom track2.0 mm
DX15 / DX16AHanging-track side / middle cover1.1 mm
DX-95 / DX-96Double / triple side seal1.1 mm
Hardware

SK703 stainless miter screws · top roller · bottom roller · DX97A three-linked sliding mechanism · BF113 side seal strip · NICE track magnetic strips (8.35×1.59) · NICE regular top-and-bottom lock · 7×4 black strip · low-rail round-cap stainless guide rail.

aluminum sliding door profile – NICE 4013 triple-track sliding door profile and hardware list with assembly diagram
NICE 4013 triple-track sliding — profile & hardware list, assembly diagram
PERFECT SYSTEM

Perfect 4016 / 4012 Solid sliding door with track

Single, double or triple-track sliding doors on the Perfect platform, with a Solid version for extra rigidity.

  • Standard platform: 1.5 mm door frames (OPK-A203-40, SK814)
  • Perfect Solid (4012): 5.0 mm solid vertical door frame SK818
  • Unlimited linkage — no fixed number of tracks or panels
  • Bottom track embedded with drain
  • SG268 three-linked sliding set for linked panels
  • Perfect handle, rubber strips and stainless round-cap guide rail
Configurations
Standard 4016 slidingSolid 4012 slidingUnlimited linked panelsEmbedded bottom track
Perfect sliding door roller setSliding door roller setSmooth bottom-track running
Perfect handle for aluminum sliding doorPerfect handleSlim, flush-look pull
Perfect linkage set for linked sliding doorsLinkage setPanels open together
Key profiles
CodeProfileThickness
OPK-A203-40 / D523Door frame (Standard / Solid)1.5 mm
SK814 / SK818Vertical door frame (Standard / Solid)1.5 / 5.0 mm
OPK-A204-40 / D524Door frame with hook1.5 mm
SK731ATop and bottom door frame1.5 mm
SG268A / SG269 / SG270Single / double / triple top track1.2 mm (SG270)
XG144 / XG145 / XG146Single / double / triple bottom track1.5 mm (XG146)
BF183 / BF184 / BF185Single / double / triple side seal1.1 mm (BF185)
BF153Side seal cover1.2 mm
Hardware

Fasteners · Perfect handle · rubber strip · strip · SG268 three-linked sliding set · low-rail round-cap stainless guide rail. 8 mm glass.

Perfect 4012 Solid triple-track sliding door profile and hardware list with assembly diagram
Perfect 4012 Solid (5.0 mm) triple-track sliding — profile & hardware list, assembly diagram
Finishes

Color cards

NICE System color card – 18 finishes for aluminum door profiles
NICE System — 18 finishes including porcelain and brushed metallic effects.
Perfect System color card – 14 finishes for aluminum door profiles
Perfect System — 14 finishes. Custom colors on request.
Heavier openings

Need a double- or triple-track sliding door profile?

For balconies, terraces and larger openings, the 40 series aluminum sliding door profile system runs a 40 mm sash on a 106 mm double-track or 159 mm triple-track frame with embedded drainage. It takes insulated glass up to 5 + 15 + 5 mm, panels up to 2.0 m wide and 3.0 m high, and includes full KY01 section codes, assembly diagrams and accessory lists.

See the 40 series profile catalogue

Request a quote for sliding panel doors

Tell us the door type, system (NICE or Perfect), number of tracks/panels, opening size and color.

Guide

Choosing sliding wall panels

One company, two websites

DoorProfile.com is run by MT Flying (Guangdong Meitong Times Aluminum, also known as Mei Tong Flying), the same Foshan factory behind mtflying.com. Same extrusion lines, same products, same engineers: a quote requested on either site is handled by the same team.

MT Flying lists these as aluminum sliding door profile with track on mtflying.com.

FAQ

Questions buyers ask

What is a sliding panel door?

A door made of several glass panels that slide past each other on a track; here they are linked so they open together.

How many panels can be linked?

No fixed limit on either NICE or Perfect.

Is the bottom track a trip hazard?

It is a low, embedded track with a drain and a stainless round-cap guide rail, close to flush with the floor.

What is the MOQ?

No MOQ for in-stock profiles; 300 kg if you want your own customised profile.

Which surface finishes do you offer?

Powder coating, anodizing, wood-grain transfer and PVDF coating. We are authorised by TIGER and AkzoNobel for powder coating and can match custom colours for your project or brand.

Can you customise the profiles?

Yes. OEM and custom extrusion from your drawings, samples or technical requirements, and we can help optimise the section before the die is opened.

How do we work together?

Send your drawings. We develop custom profiles or recommend a system from our range, and supply profiles, hardware and accessories together so production can start when the goods arrive.