Bring a section drawing, a sample or just an application brief. We connect the geometry with the die, the finish, the machining and the packing that decide whether the profile works on your production line, and supply it from our own presses in Foshan.

A window frame needs matching sashes, beads, seals and hardware interfaces. An industrial section may depend on one precise mounting face or a hole pattern. Decorative profiles live or die by exposed surfaces and consistent colour. We review those requirements together so the quote describes a usable product, not an isolated bar, and you can buy extrusions alone or with components and finished units.
Heated aluminium is pushed through a shaped die; cooling, straightening, cutting and ageing complete the section. Selected window systems use 6063-T5; suitability for a new section is confirmed in review.
A new shape starts with an approved drawing. Share application, quantities, repeat demand and mating parts; die cost, ownership, changes and sample approval are agreed up front.
Frame, sash, bead and connector sections are reviewed as one bill of materials, and later batches follow the approved revision.
Powder coating in our own coating lines, anodizing for a metallic look, wood grain for a timber look. Tell us which faces stay visible.
Do not pick a profile from alloy designation alone: wall distribution, hollow chambers, surface needs and assembly interfaces all affect feasibility.



Material report L26-WT6629 (22 July 2026, Foshan Supervision Testing Center of Quality and Metrology) covers a submitted 6060-T66 JNW base-material sample made by Foshan Meitong Shidai Aluminum Co., Ltd.: all 16 inspected items meet GB/T 5237.1-2017; tensile strength 233 N/mm², proof strength 211 N/mm², elongation 11.0%. Results apply only to that sample. It is not a CE declaration or an Australian whole-window approval; those documents are confirmed per product.
DoorProfile.com is run by MT Flying (Guangdong Meitong Times Aluminum, also known as Mei Tong Flying), the same Foshan factory behind mtflying.com. Same extrusion lines, same products, same engineers: a quote requested on either site is handled by the same team.
MT Flying presents this service as aluminum extrusion manufacturer on mtflying.com. For established sections see its aluminum profile supplier page; for new sections see extruded aluminum profiles to your drawing.
A dimensioned drawing, alloy and temper, finish, cut length, quantity and destination, with critical tolerances, machining and mating sections marked. A sample or sketch is fine to start.
6063-T5 is used in selected architectural systems; state it in your enquiry so suitability, availability and documents are confirmed for your section.
Yes, reviewed against your bill of materials, with an itemised quote by section and finish.
30 extrusion presses, for stock sections and drawing-based custom work.
Profiles, tooling where needed, finish, processing, inspection and packing, with critical dimensions and sample approval agreed.
Request a quoteWhatsAppmichael@mtflying.com