Home / Aluminum Profiles / Door Profiles / Interior Profile / Swing Series

Aluminum Framed Glass Door Profiles for Hinged Interior Doors

Interior door profiles · Swing series

Slim swing doors with damped, concealed frames

Slim hinged glass doors for bedrooms, bathrooms and studies. NICE focuses on damped, hidden-frame installation with four ways to finish the wall opening; Perfect pairs narrow frames with air hinges and hidden two-dimensional hinges. Both sit in the same profile family as the matching sliding, hanging and folding doors.

NICE aluminum swing door profile with hidden frameNICE · Swing door
Perfect narrow-frame aluminum swing door profilePerfect · Swing door

Swing door, in motion

Slim frame, quiet hinged opening. This is how the profiles look on a finished door.

Both systems offer slim-frame swing doors for bedrooms, bathrooms and studies. NICE focuses on damped, hidden-frame installation; Perfect pairs narrow frames with air hinges and hidden two-dimensional hinges. Each swing profile is part of a complete door profile family — NICE door profiles are universal profiles: the same frames build eight door types, so swing, sliding, hanging and folding doors in one project share one sightline and one finish.

NICE SYSTEM

NICE 4013 / 4010 swing door

Damped door frames with four ways to finish the wall opening.

  • Damping vertical and top horizontal frames for soft closing
  • Hidden-frame casing (buckle plate) or hidden-frame single wrap
  • Standard double-wrap or single-wrap casings
  • 2.0 mm light stiles and bottom light stile
Configurations
Hidden-frame casing buckle plateStandard double wrapHidden-frame single wrapStandard single wrap
Magnetic cover on NICE swing door profileMagnetic coverClean lines, no visible fixings
swing door profile – Anti-vibration points on swing door sashAnti-vibration pointsQuieter closing
swing door profile – Frameless-look NICE swing door flush with the wallFrameless lookDoor sits flush with the wall
Hardware

Key profiles: D-A617A damping vertical frame · D-A633 damping top frame · D-A622 / D-A623 light stiles (2.0 mm) · D-A621B damping plaster frame · DX18A door casing · D-A619 / D-A632B trims. Hardware: top & bottom hinges (L/R), swing door lock, bolt lock, swing door double damping, aluminum corner codes.

PERFECT SYSTEM

Perfect swing door

Narrow-frame swing doors with air hinges and hidden two-dimensional hinges.

  • 40 system air hinge — not divided into left and right
  • Side hidden two-dimensional (adjustable) hinge
  • Push-in door jambs with trims and casings
  • Single or double-glass panels
Configurations
Single swing doorDouble-glass swing doorHidden hinge versionAir hinge version
swing door profile – 40 system air hinge for Perfect swing door40 system air hingeSame part for left and right
swing door profile – Hidden two-dimensional hingeHidden 2D hingeAdjustable, invisible when closed
swing door profile – Slim swing door lockSwing door lockSlim matching lock
Hardware

Key profiles: SK599 closing · D-A550 F-strip · BT058H trim · D-A563H / D-A613 / D-A566 / D-A562 push-in door jambs · BT056 / BT057 door casing with trim. Hardware: fasteners, swing door lock, air hinge, hidden hinge, Perfect air hinge base.

NICE patent · 2026

What makes the NICE System different

NICE System has 8 types(universal profiles)
swing door profile – NICE System 6 mm thick blackout cover – aluminum door profile detailPATENT6 mm thick blackout coverNICE System with narrow gap
swing door profile – NICE System magnetic cover – aluminum door profile detailPATENTMagnetic coverEasy to install and never falls off
swing door profile – NICE System linkage parts without left/right distinction – aluminum door profile detailPATENTLinkage parts without left/right distinctionNo need to worry about the direction
NICE System t-shape hanging stick – aluminum door profile detailPATENTT-shape hanging stickPatented design with high load capacity
NICE System nice lock – aluminum door profile detailPATENTNICE lockLock on the upper rail, not installed on the seal
NICE System hidden anti-sway wheels – aluminum door profile detailPATENTHidden anti-sway wheelsProtect wheels, screwed out when installation is finished
NICE System nice wheel – aluminum door profile detailPATENTNICE wheelExclusive force bearing on the surface pulleys
NICE System hidden hardware for folding doors – aluminum door profile detailPATENTHidden hardware for folding doorsAll hardware is invisible in appearance
NICE System anti-vibration points of door sash – aluminum door profile detailPATENTAnti-vibration points of door sashReduce vibration when closing the door
Multiple linked-up NICE sliding door with bottom trackMultiple linked-up sliding door with bottom track
NICE PT door with universal door profilePT door
NICE folding door profileFolding door
Finishes

Color cards

NICE System color card – 18 finishes for aluminum door profiles
NICE System — 18 finishes including porcelain and brushed metallic effects.
Perfect System color card – 14 finishes for aluminum door profiles
Perfect System — 14 finishes. Custom colors on request.

Request a quote for framed glass doors

Tell us the door type, system (NICE or Perfect), number of tracks/panels, opening size and color.

Guide

Choosing a framed glass swing door

One company, two websites

DoorProfile.com is run by MT Flying (Guangdong Meitong Times Aluminum, also known as Mei Tong Flying), the same Foshan factory behind mtflying.com. Same extrusion lines, same products, same engineers: a quote requested on either site is handled by the same team.

MT Flying lists these as swing door profiles on mtflying.com.

FAQ

Questions buyers ask

Which glass do these doors take?

Perfect offers single or double-glass panels; NICE interior doors typically use single glass. Confirm per series.

Can the frame be hidden in the wall?

Yes, with the NICE hidden-frame casing or hidden-frame single wrap.

Do the hinges need left and right versions?

The Perfect 40 system air hinge is the same part for both hands.

What is the MOQ?

No MOQ for in-stock profiles; 300 kg if you want your own customised profile.

Which surface finishes do you offer?

Powder coating, anodizing, wood-grain transfer and PVDF coating. We are authorised by TIGER and AkzoNobel for powder coating and can match custom colours for your project or brand.

Can you customise the profiles?

Yes. OEM and custom extrusion from your drawings, samples or technical requirements, and we can help optimise the section before the die is opened.

How do we work together?

Send your drawings. We develop custom profiles or recommend a system from our range, and supply profiles, hardware and accessories together so production can start when the goods arrive.