Home / Aluminum Profiles / Door Profiles / Interior Profile / Hanging Series

Hanging Sliding Door Profiles: Suspended Slim Doors with No Floor Track

Interior door profiles · Hanging series

Top-hung sliding doors with no bottom track

In a top hung sliding door the whole panel rides on rollers in the ceiling track, so the floor stays completely clear: ideal between rooms, in open-plan offices and showrooms. NICE adds patented hanging details; Perfect offers a low-profile hanging track. Both link panels without limit.

NICE patented T-shape aluminum hanging profile and hanging trackNICE · Patented T-shape hanging track
Perfect hanging sliding door profile used as a partition hanging systemPerfect · Hanging sliding doors
∞Unlimited linked panels
T-shapeNICE patented hanging stick
2.3mmPerfect low hanging track
18 + 14Finishes (NICE + Perfect)

Our hanging sliding door profiles carry the whole panel from the top track, so a suspended slim door needs no floor rail at all. The NICE T-track (T-slide) and Perfect systems suit partition hanging between rooms, open-plan offices and showrooms where a clear, level floor matters. Looking for floor-track sets? See sliding door with track.

Choose your system

NICE or Perfect?

In a hanging door the whole panel is carried by rollers in the top track, so there is nothing on the floor to trip over or clean. Both systems link panels without limit so they open together.

NICE SystemPerfect System
Frame series4013 (13 mm) and 4016 (16 mm)Standard 4016 and Solid 4012 (5.0 mm solid vertical frame)
Hanging tracksDX-89 / DX-90 hanging tracks (1.8 mm)OPK-A123/124/125-40 low hanging tracks (2.3 mm)
Carrying systemPatented T-shape hanging stick, NICE wheel with surface-bearing pulleysHanging roller set, hanging roller set with linkage
StabilityHidden anti-sway wheels, anti-vibration points on the sashMatching side seals and side seal covers
Linked panelsUnlimited linkageUnlimited linkage
Best forThe slimmest top-hung look with fully hidden hardwareWide openings with a low-profile hanging track
NICE SYSTEM

NICE 4013 / 4016 hanging sliding door

A top-hung door built around the patented T-shape hanging stick — high load capacity with a 6 mm narrow-gap blackout cover.

  • Patented T-shape hanging stick with high load capacity
  • NICE wheel: force borne on the surface pulleys
  • Hidden anti-sway wheels — screwed out after installation
  • NICE lock sits on the upper rail, not on the seal
  • 6 mm thick blackout cover with a narrow gap
  • Unlimited linkage in 4013 and 4016 frame series
Configurations
4013 hanging4016 hangingUnlimited linked panelsNo bottom track
NICE T-shape hanging stick for aluminum hanging profileT-shape hanging stickPatented, high load capacity
NICE wheel with surface-bearing pulleysNICE wheelSurface-bearing pulleys
Hidden anti-sway wheels for hanging sliding doorHidden anti-sway wheelsProtects wheels, hidden after install
Key profiles
CodeProfileThickness
DX-98 / DX-10413 / 16 rounded door frame1.5 mm
DX-97C / DX-100B13 / 16 vertical sash2.3 mm
SK819 / DX-10513 / 16 hook stile1.5 mm
DX-83ATop profile2.0 mm
DX10Bottom profile1.9 mm
DX-89 / DX-90Double / triple hanging track1.8 mm
DX14BHanging-track side cover plate1.4 mm
DX15 / DX16AHanging-track side / middle cover1.1 mm
DX-95 / DX-96Double / triple side seal1.1 mm
Hardware

NICE double-damping hanging wheels · DX115 connected hanging linkage sets · NICE track magnetic strips · BF113 side seal strip · NICE system handle and regular top-and-bottom lock · stainless miter screws.

NICE hanging sliding door profile assembly drawing
NICE hanging sliding door — assembly drawing
PERFECT SYSTEM

Perfect 4016 hanging sliding door

Low-profile hanging tracks with linkage roller sets — panels link without limit.

  • Low-profile hanging tracks (2.3 mm)
  • Standard 1.5 mm frames or Solid 5.0 mm vertical frame
  • Hanging roller sets — standard and with linkage
  • Unlimited linkage — no fixed number of tracks or panels
  • D163A middle cover and SG280 hanging-track side cover
  • Perfect handle, rubber and strip seals
Configurations
Standard 4016 hangingSolid 4012 hangingUnlimited linked panelsNo bottom track
Perfect hanging roller setHanging roller setCarries the panel from above
Perfect hanging roller set with linkageRoller set with linkageLinked multi-panel opening
Perfect handle for hanging sliding doorPerfect handleSlim, flush-look pull
Key profiles
CodeProfileThickness
OPK-A203-40 / D523Door frame (Standard / Solid)1.5 mm
SK814 / SK818Vertical door frame (Standard / Solid)1.5 / 5.0 mm
OPK-A204-40 / D524Door frame with hook1.5 mm
SK731ATop and bottom door frame1.5 mm
OPK-A123/124/125-40Low single / double / triple hanging track2.3 mm
D163AMiddle cover1.4 mm
SG280Hanging-track side cover1.1 mm
BF183 / BF184 / BF185Single / double / triple side seal1.1 mm
BF153Side seal cover1.2 mm
Hardware

Fasteners · Perfect handle · rubber strip · strip · hanging roller set (2 sets) · hanging roller set with linkage (1 set).

Perfect 4016 triple-track hanging door profile and hardware list with assembly diagram
Example: Perfect 4016 triple-track hanging — profile & hardware list, assembly diagram
NICE patent · 2026

What makes the NICE System different

NICE System has 8 types(universal profiles)
NICE System 6 mm thick blackout cover – aluminum door profile detailPATENT6 mm thick blackout coverNICE System with narrow gap
NICE System magnetic cover – aluminum door profile detailPATENTMagnetic coverEasy to install and never falls off
NICE System linkage parts without left/right distinction – aluminum door profile detailPATENTLinkage parts without left/right distinctionNo need to worry about the direction
NICE System t-shape hanging stick – aluminum door profile detailPATENTT-shape hanging stickPatented design with high load capacity
NICE System nice lock – aluminum door profile detailPATENTNICE lockLock on the upper rail, not installed on the seal
NICE System hidden anti-sway wheels – aluminum door profile detailPATENTHidden anti-sway wheelsProtect wheels, screwed out when installation is finished
NICE System nice wheel – aluminum door profile detailPATENTNICE wheelExclusive force bearing on the surface pulleys
NICE System hidden hardware for folding doors – aluminum door profile detailPATENTHidden hardware for folding doorsAll hardware is invisible in appearance
NICE System anti-vibration points of door sash – aluminum door profile detailPATENTAnti-vibration points of door sashReduce vibration when closing the door
Multiple linked-up NICE sliding door with bottom trackMultiple linked-up sliding door with bottom track
NICE PT door with universal door profilePT door
NICE folding door profileFolding door
Finishes

Color cards

NICE System color card – 18 finishes for aluminum door profiles
NICE System — 18 finishes including porcelain and brushed metallic effects.
Perfect System color card – 14 finishes for aluminum door profiles
Perfect System — 14 finishes. Custom colors on request.

Request a quote for top hung sliding doors

Tell us the door type, system (NICE or Perfect), number of tracks/panels, opening size and color.

Guide

Hanging door system checklist

One company, two websites

DoorProfile.com is run by MT Flying (Guangdong Meitong Times Aluminum, also known as Mei Tong Flying), the same Foshan factory behind mtflying.com. Same extrusion lines, same products, same engineers: a quote requested on either site is handled by the same team.

MT Flying lists these as aluminum hanging profiles on mtflying.com.

FAQ

Questions buyers ask

What is a top hung sliding door?

A sliding door carried entirely by rollers in a top track, with no bottom rail on the floor.

How does NICE stop the panel swinging?

Hidden anti-sway wheels guide the panel and are screwed out of sight after installation.

Can I link several hanging panels?

Yes, without limit, on both NICE and Perfect.

What is the MOQ?

No MOQ for in-stock profiles; 300 kg if you want your own customised profile.

Which surface finishes do you offer?

Powder coating, anodizing, wood-grain transfer and PVDF coating. We are authorised by TIGER and AkzoNobel for powder coating and can match custom colours for your project or brand.

Can you customise the profiles?

Yes. OEM and custom extrusion from your drawings, samples or technical requirements, and we can help optimise the section before the die is opened.

How do we work together?

Send your drawings. We develop custom profiles or recommend a system from our range, and supply profiles, hardware and accessories together so production can start when the goods arrive.