Home / Aluminum Profiles / Door Profiles / Interior Profile / Hanging Series
In a top hung sliding door the whole panel rides on rollers in the ceiling track, so the floor stays completely clear: ideal between rooms, in open-plan offices and showrooms. NICE adds patented hanging details; Perfect offers a low-profile hanging track. Both link panels without limit.
NICE · Patented T-shape hanging track
Perfect · Hanging sliding doorsOur hanging sliding door profiles carry the whole panel from the top track, so a suspended slim door needs no floor rail at all. The NICE T-track (T-slide) and Perfect systems suit partition hanging between rooms, open-plan offices and showrooms where a clear, level floor matters. Looking for floor-track sets? See sliding door with track.
In a hanging door the whole panel is carried by rollers in the top track, so there is nothing on the floor to trip over or clean. Both systems link panels without limit so they open together.
| NICE System | Perfect System | |
|---|---|---|
| Frame series | 4013 (13 mm) and 4016 (16 mm) | Standard 4016 and Solid 4012 (5.0 mm solid vertical frame) |
| Hanging tracks | DX-89 / DX-90 hanging tracks (1.8 mm) | OPK-A123/124/125-40 low hanging tracks (2.3 mm) |
| Carrying system | Patented T-shape hanging stick, NICE wheel with surface-bearing pulleys | Hanging roller set, hanging roller set with linkage |
| Stability | Hidden anti-sway wheels, anti-vibration points on the sash | Matching side seals and side seal covers |
| Linked panels | Unlimited linkage | Unlimited linkage |
| Best for | The slimmest top-hung look with fully hidden hardware | Wide openings with a low-profile hanging track |
A top-hung door built around the patented T-shape hanging stick — high load capacity with a 6 mm narrow-gap blackout cover.
T-shape hanging stickPatented, high load capacity
NICE wheelSurface-bearing pulleys
Hidden anti-sway wheelsProtects wheels, hidden after install| Code | Profile | Thickness |
|---|---|---|
| DX-98 / DX-104 | 13 / 16 rounded door frame | 1.5 mm |
| DX-97C / DX-100B | 13 / 16 vertical sash | 2.3 mm |
| SK819 / DX-105 | 13 / 16 hook stile | 1.5 mm |
| DX-83A | Top profile | 2.0 mm |
| DX10 | Bottom profile | 1.9 mm |
| DX-89 / DX-90 | Double / triple hanging track | 1.8 mm |
| DX14B | Hanging-track side cover plate | 1.4 mm |
| DX15 / DX16A | Hanging-track side / middle cover | 1.1 mm |
| DX-95 / DX-96 | Double / triple side seal | 1.1 mm |
NICE double-damping hanging wheels · DX115 connected hanging linkage sets · NICE track magnetic strips · BF113 side seal strip · NICE system handle and regular top-and-bottom lock · stainless miter screws.

Low-profile hanging tracks with linkage roller sets — panels link without limit.
Hanging roller setCarries the panel from above
Roller set with linkageLinked multi-panel opening
Perfect handleSlim, flush-look pull| Code | Profile | Thickness |
|---|---|---|
| OPK-A203-40 / D523 | Door frame (Standard / Solid) | 1.5 mm |
| SK814 / SK818 | Vertical door frame (Standard / Solid) | 1.5 / 5.0 mm |
| OPK-A204-40 / D524 | Door frame with hook | 1.5 mm |
| SK731A | Top and bottom door frame | 1.5 mm |
| OPK-A123/124/125-40 | Low single / double / triple hanging track | 2.3 mm |
| D163A | Middle cover | 1.4 mm |
| SG280 | Hanging-track side cover | 1.1 mm |
| BF183 / BF184 / BF185 | Single / double / triple side seal | 1.1 mm |
| BF153 | Side seal cover | 1.2 mm |
Fasteners · Perfect handle · rubber strip · strip · hanging roller set (2 sets) · hanging roller set with linkage (1 set).

PATENT6 mm thick blackout coverNICE System with narrow gap
PATENTMagnetic coverEasy to install and never falls off
PATENTLinkage parts without left/right distinctionNo need to worry about the direction
PATENTT-shape hanging stickPatented design with high load capacity
PATENTNICE lockLock on the upper rail, not installed on the seal
PATENTHidden anti-sway wheelsProtect wheels, screwed out when installation is finished
PATENTNICE wheelExclusive force bearing on the surface pulleys
PATENTHidden hardware for folding doorsAll hardware is invisible in appearance
PATENTAnti-vibration points of door sashReduce vibration when closing the door
Multiple linked-up sliding door with bottom track
PT door
Folding door

Tell us the door type, system (NICE or Perfect), number of tracks/panels, opening size and color.
DoorProfile.com is run by MT Flying (Guangdong Meitong Times Aluminum, also known as Mei Tong Flying), the same Foshan factory behind mtflying.com. Same extrusion lines, same products, same engineers: a quote requested on either site is handled by the same team.
MT Flying lists these as aluminum hanging profiles on mtflying.com.
A sliding door carried entirely by rollers in a top track, with no bottom rail on the floor.
Hidden anti-sway wheels guide the panel and are screwed out of sight after installation.
Yes, without limit, on both NICE and Perfect.
No MOQ for in-stock profiles; 300 kg if you want your own customised profile.
Powder coating, anodizing, wood-grain transfer and PVDF coating. We are authorised by TIGER and AkzoNobel for powder coating and can match custom colours for your project or brand.
Yes. OEM and custom extrusion from your drawings, samples or technical requirements, and we can help optimise the section before the die is opened.
Send your drawings. We develop custom profiles or recommend a system from our range, and supply profiles, hardware and accessories together so production can start when the goods arrive.