One aluminium window is a set of profiles (frame, sash, mullion, bead, screen), a kit of accessories (corner cleats, gaskets, brace plates, handles) and a few workshop machines (double-head saw, punching dies, corner crimper). Here is what each one does.

Fixed into the wall; carries the window and the drainage path. Its depth usually names the series (55, 70…).
The opening part; holds glass and the hardware groove. Casement, sliding and tilt-and-slide each use a different sash.
Divide the frame vertically / horizontally; ends milled to the frame contour.
Clip-in profile that clamps the glass; sized to the glass thickness.
Light frame for the insect mesh, separate or integrated.



Aluminium angle pushed into two mitred profiles; joins the corner once crimped or pinned.
Flat plate across the mitre so faces sit flush.
EPDM between glass and profile and between sash and frame; brush strips on sliding sashes.
Handle drives the locking points; hinges, stays, locks and rollers match the profile groove.
Carry sliding sashes, sized to sash weight and roller groove.
We pack hardware, seals, hinges, screws and corner pieces with the profiles. Buying advice: sourcing window profiles from China.

Cuts both ends in one pass, usually 45° for corners; one head moves to set length.
Press dies made for one series: drainage slots, cleat points, hardware cut-outs.
Cuts mullion and transom ends to fit the frame in a T-joint.
Presses the profile wall into the cleat grooves to lock the mitre.
Drawings here are simplified diagrams, not sections of a specific series.
DoorProfile.com is run by MT Flying (Guangdong Meitong Times Aluminum, also known as Mei Tong Flying), the same Foshan factory behind mtflying.com. Same extrusion lines, same products, same engineers: a quote requested on either site is handled by the same team.
MT Flying covers the same topic on window profile parts, accessories and machines on mtflying.com, next to its window profiles.
Outer frame, sash, mullions or transoms, glazing beads and the screen profile. Cleats, gaskets, brace plates and hardware are accessories ordered with it.
A double-head mitre saw, a punching press with series dies (or a copy router), an end mill if there are mullions, and a corner crimper.
They are made for the profile shape and hole positions. Some series can share dies; adjustable tools or CNC can handle several.
Mostly not: corners are usually cut at 45° and joined with cleats and a crimper; other systems use screws or 90° cuts.
Send your drawing or window schedule; we reply with sections, the accessory list, price and lead time.
Request a quoteWhatsAppmichael@mtflying.com