Buyer guide

Types of Door Profiles: Sliding, Swing, Pocket, Folding and Pivot Compared

Every aluminium door starts with one decision: how the panel moves. That choice fixes which door profile you need, how much wall or floor space the door takes and what hardware goes with it. This guide compares the nine opening types we extrude profiles for, with the space each one needs and where it works best.

Door profile types at a glance

TypeHow it movesSpace neededTypical useProfile system
Sliding (floor track)Panels run on bottom rollers in a 2 to 5 track frameNone in front of the doorBalconies, kitchens, terraces40 series, 150 series
Linked sliding (interior)Panels on a top track and a low drained bottom track, opening togetherNoneRoom dividers, kitchen partitionsSliding with track
HangingTop-hung rollers, no floor trackWall space beside the openingBedrooms, studies, barrier-free floorsHanging profiles
PocketSlides into a cavity inside the wallA wall cavity the width of the panelSmall rooms, bathrooms, closetsPocket profiles
SwingHinged on one sideThe full swing arcOffices, bathrooms, meeting roomsSwing profiles
Folding (bi-fold)Panels fold and stack to one or both sidesStack depth at the sideWide openings, patios, shopsFolding profiles
Half folding (3:7)One narrow and one wide leaf fold togetherSmallKitchens, balconies, tight corridors37 folding
PivotRotates on a pivot set in from the edgeArc on both sides of the pivotFeature doors, lobbies, villasPivot profiles
PT (pivot-translate)Pivots and slides in one movementSmallCompact rooms where a swing door will not fitPT profiles

Exterior vs interior door profiles

Exterior

Exterior door profiles must carry insulated glass, drain water and resist wind. That is why the 40 series takes insulated glass up to 5 + 15 + 5 mm and the 150 series a 43 mm glass pocket with dual-row rollers rated up to 170 kg per set, on flush, floating or motorized tracks.

Interior

Interior door profiles are about sightline and finish. NICE frames are 13 mm or 16 mm wide and one frame family builds eight door types, so sliding, swing and folding doors in the same home match. Perfect adds a 5.0 mm solid vertical frame for tall panels.

Five questions that decide the door profile

Profiles, windows and extrusion from one factory

All door profile types on this site are extruded in 6063-T5 by MT Flying in Foshan. If the same project needs window profiles or thermal break profiles, they can be finished in the same colour and shipped together. For a full manufacturer overview see aluminum door profiles manufacturer in China.

FAQ

What is the most space-saving door profile type?

Pocket doors use no floor or wall space once open because the panel disappears into the wall. Hanging and linked sliding doors are next; they need wall space beside the opening but nothing in front of it.

Which door type suits a large glass wall?

A panoramic sliding door. The 150 series carries sashes up to 3.5 m wide and 6.0 m high on 2 to 5 tracks.

Can one profile family build different door types?

Yes. NICE universal interior profiles build eight door types from one frame family, which keeps sightlines and finishes consistent across a project.

Not sure which type fits?

Send a photo or sketch of the opening with width and height. We reply with the door profile type, series and section drawings.

Ask an engineer