Technical reference

Aluminium Door Profile Dimensions and Sizes Chart

Frame depth, sash width, interlock sightline, wall thickness and maximum panel size for our main door profile series, in one place. Use it to shortlist a series before you ask for section drawings. Values are nominal catalogue figures; every order is confirmed on the drawing.

Series comparison

Dimension40 series sliding150 series panoramicNICE interiorPerfect interior
Frame depth106 mm (2-track), 159 mm (3-track)150 mm (2-track), 233 mm (3-track)Confirmed per door typeConfirmed per door type
Frame / face width40 mm sash platformSlim frame, concealed option13 mm (4013) or 16 mm (4016)Standard frame or 5.0 mm solid vertical frame (4012)
Interlock sightline18 mm; reinforced above 2.6 m height25 mmn/an/a
Sash widths52, 65 and 75 mmHeavy-duty sashn/an/a
Wall thickness1.4 to 3.0 mm by section2.0 mm frame, 3.0 mm sashFrom 2.0 mm on swing stiles and folding rails1.5 mm standard, 5.0 mm solid frame
Max panelW 2.0 m × H 3.0 mW 3.5 m × H 6.0 mConfirmed per openingConfirmed per opening
GlassInsulated up to 5 + 15 + 5 mm43 mm pocket; standard 6 + 27A + 6 mm8 mm single glass8 mm single glass
Tracks2 or 3; flush, high, floating, lift2 to 5; pre-embedded, floating, motorizedTop track + low drained bottom trackTop track + low drained bottom track

40 series section sizes (KY01)

Selected sections from the 63-entry KY01 profile index, with nominal wall thickness and weight per metre.

CodeSectionWall (mm)kg/m
KY01-03052 mm sash3.01.34
KY01-01965 mm sash2.01.32
KY01-02065 mm sash3.01.44
KY01-02175 mm sash3.01.61
KY01-003FDouble-track bottom track1.41.94
KY01-014FTriple-track bottom track1.42.79
KY01-009Double-track floating bottom track1.42.32
KY01-015Triple-track floating bottom track1.43.04
KY01-005Double-track flat bottom track1.60.51
KY01-016Triple-track flat bottom track1.60.77

Full sections: KY01-030, KY01-041 two-track outer frame, KY01-046 18 mm reinforced interlock.

How to read a door profile size

Need sizes for other profiles?

This chart covers door profiles. Dimensions for window, curtain wall and industrial sections are published by MT Flying: see aluminium window profiles, thermal break profiles and custom extrusion if you need a section made to your own drawing.

Get the section drawings

Tell us the series, opening size and glass. We send DWG or PDF section drawings with weights for your fabrication list.

Request drawings