
KY01-030 · 52 mm sash
3.0 mm nominal wall · 1.34 kg/m catalogue weight
The two-track outer frame of the KY01 / 40 series: 2.0 mm nominal wall, 1.57 kg/m, drawn at 106 × 28 mm. It appears in the earlier general catalogue but not the newer double-track sheet, so confirm the current assembly before ordering.
KY01-041 is listed in the MT Flying KY01 sliding door profile family as a two-track outer frame. Use the full model code and the section drawing below for your enquiry.
Request this profile
| Model | KY01-041 |
|---|---|
| Brand | MT Flying |
| System | KY01 / 40 Series sliding door |
| Component | Two-track outer frame |
| Nominal wall designation | 2.0 mm |
| Catalogue weight | 1.57 kg/m |
| Drawing dimensions | 106 x 28 mm |
| Source | S6: PDF page 28, printed pages 53-54 |
| Transcription reviewed | 16 November 2026 |
Shown in legacy catalogue; absent from current double-track selection sheet. Do not substitute KY01-057 without engineering approval.
Confirm drawing revision and matching components before ordering. Do not infer panel load limits, wind resistance or certified system performance from the section weight or wall designation alone.
Open KY01-041 in the searchable MT Flying technical catalogue, page 19. The image is cropped from the supplied catalogue; the drawing has not been generated or redrawn.
Use our official enquiry channel to confirm the current production drawing, alloy and temper, finish, cut length, order quantity and matching parts. Read the KY01 factory and sourcing information and visit the Foshan extrusion factory overview.
Model-specific production records and inspection requirements should be agreed with the factory team for the order. This reference does not assert exclusive ownership of the KY01 model code or die.

3.0 mm nominal wall · 1.34 kg/m catalogue weight

2.0 mm nominal wall · 1.57 kg/m catalogue weight

4.0 mm nominal wall · 1.62 kg/m catalogue weight
Send your model code, quantity, finish, length and destination port. We will confirm the section, matching components and production requirements with your quotation.
Request KY01-041 Two-Track Outer Frame on WhatsAppEmail the factory teammichael@mtflying.com · +86 15302856248
Technical index revision: 16 November 2026. Catalogue values are nominal; final supply follows the approved order drawing.
DoorProfile.com is run by MT Flying (Guangdong Meitong Times Aluminum, also known as Mei Tong Flying), the same Foshan factory behind mtflying.com. Same extrusion lines, same products, same engineers: a quote requested on either site is handled by the same team.
MT Flying publishes the KY01 / 40 series on mtflying.com too (see it there). Here: slimline sliding doors · KY01 index · door profile dimensions · sliding door track profiles.
It is shown in the legacy catalogue and absent from the current double-track selection sheet.
Not without engineering approval.
No. Wall and weight values are nominal catalogue references; supply follows the approved order drawing.
Send the model code, quantity, finish, length and destination port; we confirm the section and matching components with the quote.