We extrude and powder coat our own aluminium profiles on one Foshan site. Horizontal and vertical powder lines run next to 30+ extrusion lines, so window, door and custom profiles leave extruded, coated, packed and ready to fabricate.


Can you do custom powder coating on aluminium extrusion profiles?
Yes. We powder coat aluminium extrusion profiles at the same Foshan site where they are extruded, on horizontal and vertical powder lines next to 30+ extrusion lines. Custom colours start from 300 kg with a typical lead time of 15–25 days, and stock profiles ship from 1 day. One order covers extrusion, coating and packing, so frames, sashes, beads and trims come out in a consistent colour.
See also: Powder coated aluminium windows · Anodized aluminum window profiles · Door profiles
Many buyers end up managing an extruder and a separate coater. Here the 6063-T5 profile is extruded in our extrusion factory, moved to the coating line, finished and packed without leaving the site: one order, one inspection plan, one consistent colour across frames, sashes, beads and trims.
Profiles hang horizontally from the conveyor through pretreatment, booth and oven: typically for shorter runs, mixed sections and frequent colour changes.
Profiles hang upright in a continuous flow: typically for long profiles and big single-colour runs.
We choose the line for each order.
6063-T5 on our own presses, cut and aged.
Cleaned and chemically pretreated for adhesion.
Charged dry powder wraps evenly around the section.
The oven melts the powder into one cured film.
Colour against the approved sample; film and appearance checks agreed per order.
Protected, bundled, labelled and loaded for export.
| Item | Value |
|---|---|
| Location | Ma’angang Industrial Zone, Shishan Town, Nanhai District, Foshan |
| Substrate | 6063-T5 extrusions made on site |
| Lines | Horizontal and vertical |
| Colours | Stock, or custom from 300 kg |
| Surfaces | Matte, gloss, textured, metallic |
| Dual colour | Different inside and outside on thermal break profiles |
| Coastal | TIGER Drylac architectural powder with enhanced seaside pretreatment, per project |
| Other finishes | Anodizing (AA20 / AA25 for coastal), wood grain |
| Products | Window, door, curtain wall, cabinet, industrial, custom |
| Lead time | Stock from 1 day; custom 15–25 days |
| Certificates | ISO 9001:2015; SGS RoHS for 6063 profiles (documents) |

Metallic and peel-proof? Anodized. Timber look? Wood grain.
Durability depends on pretreatment, film build, curing and site exposure. By the sea we normally evaluate TIGER Drylac with enhanced seaside pretreatment; see powder coating vs anodizing. If your spec names Qualicoat, AAMA 2604 / 2605 or GB/T 5237.4, include it and we confirm the powder system and documents before production.
Visit the lines: about 40 minutes from the Canton Fair; factory visit subsidy.
DoorProfile.com is run by MT Flying (Guangdong Meitong Times Aluminum, also known as Mei Tong Flying), the same Foshan factory behind mtflying.com. Same extrusion lines, same products, same engineers: a quote requested on either site is handled by the same team.
MT Flying describes these lines as its powder coating factory in China on mtflying.com.
A factory: extrusion, die making, powder coating and warehousing on one 200,000 m² Foshan site since 2010.
300 kg, typically 15–25 days. Stock colours have no minimum.
We normally evaluate TIGER Drylac with enhanced seaside pretreatment, confirmed per order.
Yes on thermal break profiles: the shells are coated separately before assembly.
Yes. Shishan Town, Nanhai District, Foshan, about 40 minutes from the Canton Fair.
Send the drawing or profile list and the colour; we reply with sections, price and lead time.
Request a quoteWhatsAppmichael@mtflying.com