Insulated profile systems

Thermally Broken Aluminium Profiles for Windows and Doors

Thermal break aluminum profiles for projects that need better insulation, more indoor comfort and less condensation. Two aluminium shells, one inside and one outside, are joined by an insulating barrier so heat cannot run straight through the metal.

Request a quoteWhatsApp +86 153 0285 6248

Thermally broken aluminium window profile
How it is made

What are thermal break profiles?

Thermal break profiles are aluminium extrusions made as two shells, one inside and one outside, joined by an insulating barrier so heat cannot run straight through the metal. Ours use glass-fibre reinforced PA66 polyamide strips rolled into 6063-T5 extrusions (the insert-strip method), matched with EPDM seals and argon-filled insulated glass. Systems: 55 series, 115 / 125 series, 120 sliding and 126 side pressure.

See also: Thermally broken aluminium windows · Powder coated aluminium windows · Aluminum sliding door profile

Two ways to break the metal path

01

Insert-strip (crimped)

Glass-fibre reinforced PA66 polyamide strips slide into grooves in the two extrusions and are rolled in. Strip width sets the insulation depth; the strips carry the load between the halves.

02

Pour-and-debridge

Liquid polyurethane is poured into a channel in one extrusion, cured, and the aluminium bridge below is cut away.

Our systems use PA66 strips on 6063-T5 extrusions, matched with EPDM seals and insulated, argon-filled glass, because thermal performance belongs to the whole system, not the profile alone. Without a break the frame is a cold bridge in winter and a hot surface in summer, and condensation forms inside.

Systems

Thermally broken systems we extrude

SystemTypeSpecification
55 seriesCasement window and door55 mm frame, PA66, EPDM, argon-filled glass, EN RC3
115 / 125 seriesCasement window115–125 mm frame, 2.0 mm walls
120 sliding window2- and 3-rail sliding6063-T5, 1.4 / 1.8 mm walls, 80 / 120 mm frame, PA66 barrier
126 side pressureSide pressure sliding6063-T5, 1.8 mm walls, PA66 strips, 41 mm glazing rabbet

Thermal break or not? Choose thermally broken profiles for heated or air-conditioned rooms, hot or cold climates and energy-code or condensation requirements. Non-thermal profiles, such as our 70 series casement and 132 ultra-narrow sliding window, cost less, allow slimmer sightlines and suit shaded areas, interiors and mild climates.

Gallery

Thermal break profile references

Thermally broken aluminium window profile
Window profile
Insulated aluminium profile system
Insulated profile system
Thermal break aluminium door and window profile detail
Door and window profile detail

Download the casement door and window profile catalogue (PDF)

Specify

How to specify thermal break window profiles

A base-material report covers the tested metal sample only; it does not establish U-value, wind, air or water performance of a finished window. Ask for the assembly report and check its size, glazing, opening type and hardware against your project.

Supply

Factory, MOQ and lead time

Documents

Test documents

Material report L26-WT6629 (22 July 2026) covers a submitted 6060-T66 JNW base-material sample and reports that the 16 inspected items meet GB/T 5237.1-2017. The result applies to that sample only, not every product or finished window. Request the full report; CE or Australian-standard documents are confirmed separately per product.

One company, two websites

DoorProfile.com is run by MT Flying (Guangdong Meitong Times Aluminum, also known as Mei Tong Flying), the same Foshan factory behind mtflying.com. Same extrusion lines, same products, same engineers: a quote requested on either site is handled by the same team.

MT Flying lists these as thermal break aluminum profiles on mtflying.com, alongside custom aluminium extrusion. Finished windows here: aluminium double glazed windows.

FAQ

Questions buyers ask

What is PA66 in a thermal break profile?

Polyamide 6.6, usually glass-fibre reinforced. It insulates far better than aluminium, expands at a similar rate, and stays strong at powder-coating temperatures.

Can you supply thermal break extrusions without the windows?

Yes: 6063-T5 thermal break profiles on their own, with matching seals and accessories, for local fabrication.

Does the profile alone decide window performance?

No. Glass, seals, hardware, fabrication and installation all affect the finished window.

Can I send an existing system drawing?

Yes. It helps us review geometry, application, finish and supply scope.

Can profiles and finished windows be quoted separately?

Yes. Tell us whether you need profiles, components or finished windows and doors.

Discuss thermally broken profiles

Send the application, drawings or opening schedule; we review it before quoting.

Request a quoteWhatsAppmichael@mtflying.com