A sliding door system is more than a frame: it is the track, sash, interlock, rollers, lock and seals designed to work together. We extrude three complete sliding systems for doors in 6063-T5 at our Foshan factory, so you can match the system to the opening instead of piecing parts together.
What is an aluminum sliding door profile?
An aluminum sliding door profile is the extruded frame, sash, interlock or track section of a sliding door; it only works as a system with matching rollers, lock and seals. We extrude three complete 6063-T5 systems: the 40 series slimline (18 mm interlock, 106 mm two-track or 159 mm three-track frame), the 150 series panoramic (25 mm interlock, sashes up to 3.5 × 6 m, 2 to 5 tracks) and the NICE / Perfect interior systems. Stock profiles have no MOQ and ship from 1 day.
See also: Door profiles · Thermal break profiles · Custom powder coating

Built on one 40 mm sash platform: two-track doors on a 106 mm frame, three-track doors on a 159 mm frame. It is the system for kitchens, balconies and interior partitions where insulated glass and a slim look both matter.
Full section list and drawings: 40 series slimline sliding doors.

For floor-to-ceiling glass. A 2.0 mm frame wall, 3.0 mm sash wall and 25 mm interlock carry very large panels on 2, 3, 4 or 5 tracks, manual or motorized.
See the sliding glass wall profile kits and the finished panoramic patio doors.

An ultra-slim system for room dividers and glass partitions. Panels hang from a top track, run in a low drained bottom track and are linked so they open together.
Details: sliding panel doors with track.
| 40 series | 150 series | NICE / Perfect | |
|---|---|---|---|
| Best for | Balconies, kitchens, partitions | Large exterior glass walls | Interior room dividers |
| Slim dimension | 18 mm interlock | 25 mm interlock | 13 or 16 mm frame |
| Tracks | 2 (106 mm) or 3 (159 mm) | 2, 3, 4 or 5 | Unlimited linked panels |
| Largest panel | W 2.0 × H 3.0 m | W 3.5 × H 6.0 m | Confirmed per opening |
| Glass | Insulated, up to 5 + 15 + 5 mm | Up to 43 mm pocket | 8 mm single glass |
| Motorized | Yes, change the upper track | Yes, motorized kits | Manual |
Other opening types: compare all door profile types, or check the door profile dimensions chart.
DoorProfile.com is run by MT Flying (Guangdong Meitong Times Aluminum, also known as Mei Tong Flying), the same Foshan factory behind mtflying.com. Same extrusion lines, same products, same engineers: a quote requested on either site is handled by the same team.
Looking for the profiles themselves? MT Flying lists every sliding door profile section, and the full aluminum door profiles range, on mtflying.com.
Use the 40 series for balcony, kitchen and terrace doors with insulated glass, the 150 series for very large panels and glass walls, and the NICE or Perfect system for interior room dividers and partitions.
The 40 series has a 106 mm two-track or 159 mm three-track frame. The 150 series is available in 2, 3, 4 or 5 tracks. NICE and Perfect link any number of interior panels.
Yes. The 40 series is motorized by replacing the upper track; the 150 series has two-track and three-track motorized kits.
Yes. Rollers, locks, seals and the other accessories for each system are packed with the profiles, so one order covers the whole door.
Stock profiles have no minimum and can ship from 1 day. Custom colours or sections start at 300 kg and usually take 15 to 25 days.
Send the system you are considering, track count, opening sizes and colour. We reply with the profile list, price and lead time.
Request a quoteWhatsAppmichael@mtflying.com