
KY01-030 · 52 mm sash
3.0 mm nominal wall · 1.34 kg/m catalogue weight
The 52 mm sash of the KY01 / 40 series sliding door: 3.0 mm nominal wall, 1.34 kg/m, drawn at 40 × 52 mm with a 28 mm inner opening. Quote the full code and use the section below when you enquire.
KY01-030 is listed in the MT Flying KY01 sliding door profile family as a 52 mm sash. Use the full model code and the section drawing below for your enquiry.
Request this profile
| Model | KY01-030 |
|---|---|
| Brand | MT Flying |
| System | KY01 / 40 Series sliding door |
| Component | 52 mm sash |
| Nominal wall designation | 3.0 mm |
| Catalogue weight | 1.34 kg/m |
| Drawing dimensions | 40 x 52 mm; inner opening 28 mm |
| Source | S3: PDF page 1; S6: PDF page 29, printed pages 55-56 |
| Transcription reviewed | 16 November 2026 |
Nominal catalogue data; not a production tolerance or load rating.
Confirm the complete track, sash, roller and seal combination before ordering. Do not infer panel load limits, wind resistance or certified system performance from the section weight or wall designation alone.
Open KY01-030 in the searchable MT Flying technical catalogue, page 15. The image is cropped from the supplied catalogue; the drawing has not been generated or redrawn.
Use our official enquiry channel to confirm the current production drawing, alloy and temper, finish, cut length, order quantity and matching parts. Read the KY01 factory and sourcing information and visit the Foshan extrusion factory overview.
Model-specific production records and inspection requirements should be agreed with the factory team for the order. This reference does not assert exclusive ownership of the KY01 model code or die.

3.0 mm nominal wall · 1.34 kg/m catalogue weight

2.0 mm nominal wall · 1.57 kg/m catalogue weight

4.0 mm nominal wall · 1.62 kg/m catalogue weight
Send your model code, quantity, finish, length and destination port. We will confirm the section, matching components and production requirements with your quotation.
Request KY01-030 52 Mm Sash on WhatsAppEmail the factory teammichael@mtflying.com · +86 15302856248
Technical index revision: 16 November 2026. Catalogue values are nominal; final supply follows the approved order drawing.
DoorProfile.com is run by MT Flying (Guangdong Meitong Times Aluminum, also known as Mei Tong Flying), the same Foshan factory behind mtflying.com. Same extrusion lines, same products, same engineers: a quote requested on either site is handled by the same team.
MT Flying publishes the KY01 / 40 series on mtflying.com too (see it there). Here: slimline sliding doors · KY01 index · door profile dimensions · sliding door track profiles.
The 52 mm sash in the KY01 / 40 series sliding door family.
No. Confirm the full track, sash, roller and seal combination; wall and weight do not establish load or wind ratings.
No. Wall and weight values are nominal catalogue references; supply follows the approved order drawing.
Send the model code, quantity, finish, length and destination port; we confirm the section and matching components with the quote.