
KY01-030 · 52 mm sash
3.0 mm nominal wall · 1.34 kg/m catalogue weight
Find the exact section. Connect with the factory.
KY system is the code printed on our 40 series sliding door profiles. Use this page to match a frame, track, sash or interlock code to its drawing, then order the exact section straight from the factory that extrudes it.
Find your KY system profileDownload technical PDF
Looking for KY01-030, KY01-041 or KY01-046? Each model below has its own drawing and reference data. Keep the full code when requesting a quote.

3.0 mm nominal wall · 1.34 kg/m catalogue weight

2.0 mm nominal wall · 1.57 kg/m catalogue weight

4.0 mm nominal wall · 1.62 kg/m catalogue weight
KY Series is this site’s series entry. KY system is the prefix printed on the 40 Series sliding door profiles. 40 Series identifies the system family, including double-track and triple-track configurations. We preserve the original model codes rather than assigning new identifiers to existing sections.
Other KY prefixes and similar third-party catalogue numbers require a drawing comparison; this page does not claim that all KY profiles are interchangeable.
| Component | Double track | Triple track |
|---|---|---|
| Frame family | 106 mm | 159 mm |
| Example top track | KY01-043 | KY01-044 |
| Raised bottom track | KY01-003F | KY01-014F |
| Floating bottom track | KY01-009 | KY01-015 |
| Sash families | 52 / 65 / 75 mm; selected lift-slide options | |
| Reinforced interlock | KY01-046, selected with the approved sash and roller assembly | |
Source: supplied MT Flying double-track and triple-track profile sheets, page 1. The 5+15A+5 glass configuration is shown in the assemblies; glass size, loads and tolerances require project review.
Meet the team behind your supply: view our aluminum extrusion factory in Foshan, including extrusion presses, runout and cutting lines, and die storage. Our KY system factory and sourcing page explains how to request model-specific production and quality documents.
Send your model code, quantity, finish, length and destination port. We will confirm the section, matching components and production requirements with your quotation.
Request KY Series on WhatsAppEmail the factory teammichael@mtflying.com · +86 15302856248
Technical index revision: 16 November 2026. Catalogue values are nominal; final supply follows the approved order drawing.
DoorProfile.com is run by MT Flying (Guangdong Meitong Times Aluminum, also known as Mei Tong Flying), the same Foshan factory behind mtflying.com. Same extrusion lines, same products, same engineers: a quote requested on either site is handled by the same team.
MT Flying publishes the KY system / 40 series on mtflying.com too (see it there). Here: slimline sliding doors · KY system index · door profile dimensions · sliding door track profiles.
KY Series is the site entry; KY system is the prefix printed on the 40 series profiles; 40 series is the system family (double and triple track).
Not automatically; similar third-party numbers need a drawing comparison.
Do not assume so: it appears in the earlier catalogue but not the newer selection sheet. Ask for the current assembly drawing.
No. Wall and weight values are nominal catalogue references; supply follows the approved order drawing.
Send the model code, quantity, finish, length and destination port; we confirm the section and matching components with the quote.