KY01 / 40 Series · interlock

KY01-046: 18 mm Reinforced Interlock Profile

The reinforced 18 mm interlock of the KY01 / 40 series, used on sliding doors taller than 2.6 m: 4.0 mm nominal wall, 1.62 kg/m, drawn at 86 × 18 mm. Confirm the roller and sash pairing for your assembly.

KY01-046 is listed in the MT Flying KY01 sliding door profile family as a 18 mm reinforced interlock. Use the full model code and the section drawing below for your enquiry.

Request this profile
KY01-046 original MT Flying section drawing

KY01-046 technical reference

ModelKY01-046
BrandMT Flying
SystemKY01 / 40 Series sliding door
Component18 mm reinforced interlock
Nominal wall designation4.0 mm
Catalogue weight1.62 kg/m
Drawing dimensions86 x 18 mm
SourceS3: PDF page 1; S6: PDF page 29, printed pages 55-56
Transcription reviewed16 November 2026

Drawing and compatibility notes

18 mm reinforced interlock family. Catalogue wall designation: 4.0 mm. Confirm roller and sash pairing for the selected assembly.

Confirm the complete track, sash, roller and seal combination before ordering. Do not infer panel load limits, wind resistance or certified system performance from the section weight or wall designation alone.

Get the original section reference

Open KY01-046 in the searchable MT Flying technical catalogue, page 21. The image is cropped from the supplied catalogue; the drawing has not been generated or redrawn.

Source this profile directly from MT Flying

Use our official enquiry channel to confirm the current production drawing, alloy and temper, finish, cut length, order quantity and matching parts. Read the KY01 factory and sourcing information and visit the Foshan extrusion factory overview.

Model-specific production records and inspection requirements should be agreed with the factory team for the order. This reference does not assert exclusive ownership of the KY01 model code or die.

Related KY01 profiles

Talk directly to MT Flying

Send your model code, quantity, finish, length and destination port. We will confirm the section, matching components and production requirements with your quotation.

Request KY01-046 18 Mm Reinforced Interlock on WhatsAppEmail the factory team

michael@mtflying.com · +86 15302856248

Technical index revision: 16 November 2026. Catalogue values are nominal; final supply follows the approved order drawing.

One company, two websites

DoorProfile.com is run by MT Flying (Guangdong Meitong Times Aluminum, also known as Mei Tong Flying), the same Foshan factory behind mtflying.com. Same extrusion lines, same products, same engineers: a quote requested on either site is handled by the same team.

MT Flying publishes the KY01 / 40 series on mtflying.com too (see it there). Here: slimline sliding doors · KY01 index · door profile dimensions · sliding door track profiles.

FAQ

Questions buyers ask

When do I need KY01-046?

For 40 series doors above 2.6 m high; the standard KY01-033 interlock covers up to 2.6 m.

Does it change the sightline?

No, both keep the 18 mm sightline.

Are catalogue values guaranteed tolerances?

No. Wall and weight values are nominal catalogue references; supply follows the approved order drawing.

How do I order?

Send the model code, quantity, finish, length and destination port; we confirm the section and matching components with the quote.